Function model
ICAN-1, ICAN-2, ICAN-4
Expands the port
ICAN-1
1 group CAN2.0A/B+1 road RS485<-> ethernet &TCP/IP
transparent data transmission. Port independent data
instruction.
ICAN-2
2 group CAN2.0A/B+1 road RS485<-> ethernet &TCP/IP
transparent data transmission. Port independent data
instruction.
ICAN-4
4 group CAN2.0A/B+1 road RS485<-> ethernet &TCP/IP
transparent data transmission. Port independent data
instruction.
CAN port parameter
SAJ1000 the CAN control chip, the highest 1Mbps/ road,
may from the definition speed, 64 bytes receives cushions, 13 bytes
transmissions cushions, support the hardware filter, tacitly approves
the work under the single filter pattern.
485 ports parameters
Maximum speed 19200bps, may establish does not have the
verification, wonderful, the partner, the blank space, the mark
verification, 5.,6,7,8 million data positions, 1, 2 stop the position.
With hypothesized string mouth software auto-adapted port
parameter. Has the main line collision detection, gives way to
traffic the function, each port are most may connect 64 lower
positions machine (this quantity affects by scene environment and
other equipment)
CAN retransmits the pattern
1. spreads loses the pattern, completely compatible
traditional RS232/RS485 communication pattern
2. CAN data packet pattern, supports the CAN2.0A/B data
transmission.
Connection
High strength binding clamp
Network
RJ45 10Mbps, TCP/IP, UDP agreement.
Movement pattern
TCP/IP Server, Client pattern.
Management
Uses the super terminal or the VSPM Telnet management
through the network management, provides RS232 management mouth which
locally uses in to manage. And has the equipment survey
function.
Safe
In sets at IP to filter, most establishes 8 to
authenticate IP.
May select and match the RC6 encryption module logarithm to
carry on 64Bit or the 128Bit data encryption according to the
transmission.
Power source
The electric power supply is: AC 85-250V or
DC100-250V, the 10-20W power source, in sets at the industry level
electrical power system. The support expansion power source
outputs, uses in to provide the power source for other equipment.
Power supply pattern
Scene power supply
Protection
Power source: In sets at the industry level
electrical power system, conforms to national standard GB/T17626-1999
or international standard IEC61000: 1,995 stipulations 2, 3, 4
levels.
Port: ESD 15kv, the surge protection, the communication
unit and the MCU unit use the entire photoelectricity isolation.
System: Automatically has dying machine to open the
function again.
Entire photoelectricity isolation
Simultaneously isolates CAN, between the RS485 unit and
the MCU unit holding wire, power source.
Movement environment
Temperature: -20-60 ? humidity: 5% - 95%
RH, not congeals the dew.
Supplements software
VSPM hypothesized string mouth software, instruction for
use and so on. The ICAN equipment took the central communication
equipment, simultaneously supports 1-4 group CAN, 1 group RS485, 1
group ethernet connection. Provides CAN<-> ethernet & the TCP/IP
agreement, RS485<-> the ethernet &TCP/IP agreement transparent data
retransmits. Each CAN port all provides the compatible
RS232/RS485 communication the class working pattern, as well as
support integrity CAN standard CAN package of mode of transmission.
The ICAN equipment controls the equipment through the ethernet
&TCP/IP agreement and the host (for example on position machine and so
on) or the host controls the network communication. May for each
kind of scale CAN, the RS485 network provide the centralized
communication service. The reliable hardware design may adapt
the bad industry environment. Http://www.powerip.net/can1.htm
correlation technical data downloading |
