Long since the very time, the printing industry as if all in under the influence which is transformed other industries 曲折�?is not going forward. But other industries - for instance said the electron and the automotive industry - must have unceasingly to improve the quality and the payment precision. The print buyer is as if more tolerant to printing. Recently several years, the people are promoting with steady steps to the printing request, although this possibly not too receives welcome, but can enable the print printing level to achieve a higher level.

Printer development

All all starts from the printer. Before several years, print certainly is not specially pays attention maintains the stable temperature and the air humidity, but now we knew this all is the print crucial factor which obtains high grade may duplicate. Lucky is: The printer manufacturer can the cooling drum which and in sets through a air control cause the printer and its the periphery temperature maintenance is constant. Also can through give the high accuracy the printer and its the module increases the weight and the heavy metal, is the printer vibration phenomenon reduces to is smallest.

Although the printer has already made the progress, but also has the place which the need consummates. In hardware aspect, but also waits for the improvement place is the two-sided printing function. The print hope can complete the single sheet paper in a molding process two-sided printing, but on printer, paper as if very active, moreover very is also difficult to control. The traditional single sheet paper printer now the paper at the same time carries on printing, waited for them to be dry, again in addition at the same time printed. But a stamping two-sided printing is an ideal choice, it cannot bring in the quality or the speed loss, meanwhile cannot appear the printing ink in the printing process to rub the dirty phenomenon. The perfecting press is a process confirmation technology, its sales volume in recent years in has also obtained the rapid growth.

Software control impetus printing unceasingly progresses

Along with the printer design and the structure mature and the mountain peak arrival, between the hardware already no longer had has distinguished, was biggest differently lies in software. Modern all printers all are control by the computer, in front of their printer control system and India the system close is connected moreover also has the certain relations with the operational channel, like this can to 活件 carry on effectively operates, including: The work plan, the work appraised that, the cost finding as well as draws up the receipt. Most importantly: The printer control system should formulate the maintenance plan, avoids the printer appearing the engine off in the production process, in brief, this requests the software easy to operate, the consideration to be thorough. Speaking of many print, appraised software appraised a design fine metal product difficultly wants to be very more than, latter is they can see to trace, the people even may through listen to judge its characteristic.

Design tendency

Has three tendencies in the printer control system developing process is very obvious. First is must have with India in front of the department suitable color management ability. Many printers control system all pursue this point, for instance was saying that, Produces the ICC characteristic description document in the actual printing foundation. Like this does not need again to carry on special printing to test adjusts the ICC characteristic description document, otherwise can disturb the normal production. This is a new technology, but this certainly did not mean the print the buyer needs to provide each kind of paper and each section printer ICC characteristic description document. Many print can choose in some daily productions the commonly used paper ICC characteristic description document, and the recommendation customer uses one kind to carry on the document preparation, for example: Colored picture transformation. The use specially makes the ICC characteristic description document can enable print to have the opportunity to make CMYK to the CMYK transformation, adjusts between the printer possibly to exist actually leaves, when necessity calibrates the input the document.

The second development tendency is from only uses the densimeter to carry on the quality control, transforms to uses the spectrophotometer to carry on the quality control. The quality spectrophotometer not only can treat as the densimeter to use, but also can read takes the spectrum value, this is accurately surveys the special color the only method.
The printer control system third development tendency - possibly also is most has the attraction to the printer operator - is to the quicker preparatory work support. Regarding some kind of specific paper and the work, its best printer establishment value could preserve, will be advantageous for the similar work repetition use. Then, supposes in advance parameter value not only including 墨斗 establishment, but also includes the air blower amount of wind parameter very many, the printing pressure which the dusting data as well as needs - and so on are very many. All these data will be all advantageous in front of India time to prepare and the opening machine waste reduction.

Conclusion

We are seeking second-generation printing and the control system, in the first generation of system, we uses the CIP3 data to carry on to the printer supposes in advance. This standard was is proposed for the first time in 1995, but this was an information one-way street. After ten years, the second-generation printer control system can support the bidirectional exchange of information. This kind of dual data exchange is JDF (CIP4) the standard core, simultaneously also is guaranteed traditional the printer technology obtains the respect and the competitive ability key aspect in this fast changing world.

The print buyer as well as the printer operators all extremely favored the modern printer control system and the printer can provide high grade and the high velocity, the customer to print the accepting for printing new request to increase the print pressure. We hoped the print the buyer can give the print enough reward, enables them to carry on the investment to the printing shop software hardware, and carries on these systems to the staff training.
Below is some occupies the dominant position the printer control system survey, mainly aims at the commercial single sheet paper printer. These materials are we through and their part of customers interviews obtain to in the market leadership.

Hyde fort Prinect CP2000

Prinect is to possesses the system general designation which interlocks with the Hyde fort software package. Lists in us in the printer manufacturer, the Hyde fort is only 11 both produces in front of India the equipment, and production printing system company. The Hyde fort calibration and the description monitor, the digital camera, the scanner, in the proof press and the printing system all has the color management tool.

Generally speaking, some kind of paper/printer combines the ICC document may toolbox produce by Prinect the Profile. The Prinect calibration module first must carry on the calibration and linearized processing to the equipment. In front of the Prinect India the connection can the system and between the printer control system establishes the relation in front of India. This connection can produce the JDF document, if is the old style system, but also can produce and it compatible PPF/CIP3 document. These two kind of documents all may use for to establish 墨斗, paper input and automatic wrap accurate parameter.

Actual carries on the control to the printer the workstation is Prinect CP2000 Center. It is connected with Prinect Image Control, can analyze the printing color, the tester linearization processes whether appropriately. In addition, also can examine the actual mesh point expansion with its connected Prinect Image Control. All these important parameters can preserve in Process Calibration Curves (process calibration curve) in.

If printing already gave this system to provide the spectrophotometer, that this also was allowed to treat as the densimeter to use. The printer operator utilizes to touch the screen to control this system, the use quality monitor (Quality Monitor) the achievement instructs. It may survey and compares on the page observe and control the strip the reading. In the printing process all collects the data all may save down, will use in the future analysis and the appraisal. Uses these data a request is must guarantee two printing groups are carry on printing by the similar way. The Prinect system may and the exterior MIS system or Hyde fort Prinect Prinance is connected.

High valuable Logotronic

The high valuable company's printer control system core is Logotronic, this company foundation version and in the professional version system all has Logotronic. The foundation version printer control system all functions which needs including the printer revolution, but professional version Logotronic expanded and the MIS connectivity related function through JDF.

Gao Bao densitronic system is responsible for the India survey. It all has in two editions. In the basic system only uses traditional the density reading, but Densitronic S is a spectrophotometer in fact, therefore it also uses the spectrum reading, regarding special color printing is useful.

Gao Bao CIP Link may or uses the PPF/CIP3 data through JDF to come to the printing system to carry on the control. This kind of data may use for to establish 墨斗 the value and the water ink is balanced. The Logotronic professional version may carry in the printer to all electronic control parameter supposes in advance, for instance said: The air blower amount of wind parameter, the dusting quantity, needs printing pressure and so on.

This technology unique occupies Yu Zheige the system adaption function, it can monitor the printer operator whether continuously in change parameter. If is this, the system can automatically adjust the general establishment, moreover this compatibility after has only carried on the certain quantity similar adjustment can have.

Logotronic S may survey the important color, for instance symbolized uses special color. Afterwards, it also can adjust the color to be balanced, prints the special color with the CMYK four colors printing ink the effect. Logotronic S can automatically monitor the print quality, moreover when when the common difference has surpassed the scope which assigns, it can remind the printer operator to adjust the establishment, common difference control in certain scope. The printer operator only needs gently, can accept or refuse to adjust.

The high valuable company also provides a special module for the guarantee quality, named Qualitronic II. The people may (in perfecting press have two cameras) through a printer in high score rate camera to the print quality, a set of accurate situation and the paper processing situation carry on the real-time monitoring. This when printing superelevation quality India is extremely useful, for example: Bill and bank bill.

Small woods KHS (high performance system)

The small woods printer control system is in KHS (high performance system) is a foundation, specially the preparatory work designs for realization fast high-grade India in front of.

Small woods KHS is a module, it smallest disposition causes the printer operator to be allowed to carry on the control under an independent environment to it. If performs this system to expand, print can the system and MIS connects through in front of JDF and India. This (digitized opening structure network) will realize through small woods Do Net.

Regardless of is any disposition, the printer all must have to have K-station, uses for to arrange all work. If it expands is the JDF module (or is PPF/CIP3 which old style system needs), K-station can prepare and use a series of supposes the value in advance. If adds on KMS for this system (small woods management system management system), in front of India between the system and MIS could realize the both-way junction. KHS usually could act according to already prints 活件 formulates the new work plan, avoided in the establishment as far as possible the change. When a new work starts, the printer certainly cannot restore to the basic establishment, but adjusts the existing value as soon as possible, causes it to suit to the new work. Our goal is must in 30 open in the printing paper to achieve the ideal print quality, but the small woods company can help us to achieve this goal.

In order to define the goal printing parameter, small woods KHS can all save all data in a database, including different paper 印刷适� as well as aspect and so on paper albedo information. Establishes this database to be able to use K-Color Profiler, PDS-S (printing density control spectrophotometer) may use for to survey, it also may use as the densimeter. The people may utilize in the database the daily production data to manufacture the ICC characteristic description document, but does not need to waste the time manufacture special India test card. It also may use for to optimize 打样 the method.

In the printing process all samples can survey and the inspection. Therefore, cannot surpass the tolerance permission the scope. Small woods KMS may guarantee the quality through the many kinds of ways, including service and maintenance plan.

Graceful Luo blue Job Pilot and Color Pilot

Graceful Luo Lan printer management system management system Pecom is by the printer management, in front of India the connection and the printer monitoring (Press Manager, Prepress Link and Press Monitor) and so on three modules is composed. Pecom may and exterior MIS or the graceful Luo Lan production management system Printnet conformity in the same place. This kind of relation all is establishes through JDF.

In the printer operation aspect, Job Pilot and Color the Pilot workstation may carry on the concerted effort cooperation. They already may independently work, also may use together with the printer administration module data. Job Pilot may process the electronic work package, inputs JDF or the CIP3 data through Prepress Link, when necessity also can edit JDF and the CIP3 data. This database includes Pan to pass all special colors the essential data, different paper information as well as printing ink data. Press Monitor (printer monitor) can provide the information which progresses about the production, meanwhile can 活件 carry on the appraisal to on the way. It also could inspect the before 活件 production condition.

Color Pilot altogether has three kind of models, each kind all uses the densimeter to carry on the color survey. The most basic edition is Color Pilot Smart, it is suitable for the small printer, only can read takes four kind of most basic printing colors the value. Color Pilot Plus has the half smoothness idea the support function and Color the Pilot complete characteristic, for instance said can more or less process type on the observation and control strip, this said to the perfecting press especially importantly. At the same time the graceful Luo blue company also introduced to the people Quick Change, this also is a graceful Luo blue technology expansion. It allows the people to carry in the printer to the free electrically controlled module supposes in advance. These establishments perhaps is 橡皮�?the clean, the automation transfers the version the adjustment, the air blower amount of wind parameter, which the dusting quantity as well as needs printing pressure and so on.

Mitsubishi IPC (intelligent printer control) server

The Mitsubishi printer control system core is IPC (intelligent printer control) the server. It may and in front of India the system is connected, also may through Mitsubishi's MAX Net and the MIS technology union.

The IPC server used a scanning spectrophotometer, MCCS (Mitsubishi color control system) has surveyed type on the observation and control strip. Mitsubishi likes using own observation and control strip, it including paper albedo reading, but this system also supports the many kinds of ordinary observations and controls strip.
Mitsubishi IPC has 6 independent modules, may help the printer the operator realizes in front of a quicker India the preparatory work.

QSI (fast 上墨) can establish the best opening machine 墨斗 value as well as the water ink is balanced. When prints the speed enhances when or reduces, Ink Flood may guarantee the print quality is not affected. It also may with Ink Key (ink key) the module coordination use, carry on two ways the establishments: The printing ink 供应�?unification change or is many inks key proportional control. Ink Fountain can automatically adjust 墨斗 the roller to cause it to match with the printing speed, thus achieves in the printing process the ideal printing ink density. It also can (Variable Ink Duct roller) coordinate the use with the invariable 墨斗 roller, the frequency which the adjustment 墨斗 roller and the sink roller contacts.

PPC (in front of India connects) in front of the server and India the system is connected can transmit JDF and the CIP3 data. The Mitsubishi IPC printer control system also can the sufficient these data carry on supposes in advance.